Archive for August, 2009

Willow Springs With ST USA, Part III

Thursday, August 13th, 2009
These Rays wheels are cursed.

These Rays wheels are cursed.

At long last, we’ve reached the final installment of the Willow Springs trilogy. To be honest, part of the day was kind of a sore subject for me and I was reluctant to talk about it, hence the delay. Before I even got to the track, I had a bolt that holds my brake bracket back out on me, on the freeway, at 80 miles per hour. Actually I didn’t even know that part of my very nice, brand new, shiny, expensive, 6-piston brake caliper was partly dragging on the inside barrel of my wheel, until it was already too late.

FML. I cried inside, a little.

FML. I cried inside, a little.

I saw a shiny piece of metal go flying out on the freeway too but didn’t connect the dots. I thought I’d just run over something and my tire might’ve kicked it out into the air. Little did I know, sad face. Honestly, I thought I was going driving home that day in the EVO to pick up the spare bolt in my living room, just to get the STi home. Vince was nice enough to get my car in the air for me, pull off the wheel, and evaluate the damage. Out of the lot of us, I’d vote Vince as best mechanic; he’s so clever and he’s quick at wrenching.

Ferdie's war chest.

Ferdie's war chest.

As it turns out, there was hope, a ray of light from above! I’d thought the bolts in the caliper were the ones I’d lost, but we’d discovered I was only missing one bolt that goes on the bottom of the bracket. Here’s where it gets good; the bolt I need is actually kind of common. I didn’t know Ferdie carries a little pot of Subaru gold with him to the track; all these little miscellaneous spare bolts, nuts, washers, screws, you name it. Random crap, and I do mean crap.

Our little camp.

Our little camp.

We found the bolt I needed, somehow. There was only one from what I could tell; that’s just how lucky/unlucky I was that day. Lucky in the sense that we’re going to fix this sucker, unlucky in the sense that we have to fix it to begin with. That’s racing for you! I actually ended up pulling off the other 3 wheels to check each bracket, now that I had very good reason to be suspicious. What the hell, all the other 3 corners were fine! FML.

Another angle of our base.

Another angle of our base.

Well, we got my car up and running and it was a great day after that, for me anyway. Ferdie’s car had an issue with his control arm the day before so he was out for the count. Jon lifted his headgasket and had coolant pushing out of the overflow tank like it was Christmas. Looks like he’s going to have to pull the heads, get a new headgasket, ARP head studs, deck the heads, you know the drill. He’s smarter than I though; his solution will not involve a new engine.

Vince's car sitting at turn 2.

Vince's car sitting at turn 2.

That’s not all! Ferdie lent his GPS data acquisition device to a fellow Subaru road racer, Cassie. This is maybe the second or third time we’ve seen her at a Speedtrial event, driving Gushi’s GC Impreza with a WRX swap. It’s a full on rally car, weighing in at only 2500 pounds packing over 300 to the wheels. Ferdie got a ride with her and says she has insane car control, demonstrated by drifting every corner. I’m very interested to get a ride with her if I see her again. Drifting is not really something any of us do, so I’d love to see that, not to mention get a ride in a 2500 pound car.

With our luck and all, the magnet that holds the GPS whatever you call it flew off in turn 2. After the event, Ferdie, Vince and I hopped into Vince’s car and walked turn 1 and 2 looking for the device. It was nowhere to be found, but we ended up walking turn 3, 5, 8 and 9. Perhaps not really walking, more like getting out of the car, looking at the road surface and surrounding area, then driving off. It was a good way to end a day that started horribly, I think.

Willow Springs With ST USA, Part II

Tuesday, August 11th, 2009
Eating breakfast next to the track.

Eating breakfast next to the track.

It’s Saturday morning, 5AM, and Yim is at the door. Time to go! We head back over to the shop to pick up our cars. It’s not even 6AM and Ferdie is quick detailing his car; no comment. We’re all sorted and hit the road. Maybe 40 minutes later, we’re at the Chevron in Rosamond, only 2-3 miles away from Willow Springs, maybe longer, I don’t know. Let’s just say 5 minutes away. We all stop to eat breakfast at Jack In The Box and Andrew happens to show up at the perfect time to join us.

I think I had some sort of burrito, something like that. We go to the driver’s meeting, pass through tech inspection, and prep our cars before the first session of the day. You always want to check your oil, torque down your lugs, adjust your tire pressures, and empty your interior. I have Schroth Profi III 6-point harnesses, so I usually have to spend a minute or two to get my anti-sub straps ready since I don’t use my harnesses in daily driving. I also brought my video camera mount in hopes of learning from my mistakes.

Vince tore his RE-01R to shreds.

Vince tore his RE-01R to shreds.

The first session wasn’t anything out of the ordinary. You’re never going to set your fastest laps in the first session; warm up your engine, your tires, and your wits. You’re not going to be going into turn 8 flat out your first lap, at least I hope not. But the second session, Vince tore up one of his tires pretty good. I was having cooling issues again and just as I was exiting the track, I saw Vince push out on 9 when he got on the throttle. I didn’t realize how scary that was until I saw it on video. Nuts.

EVO X, GRB STi, GRB STi, Legacy, GRB STi, GRB STi, GRB STi.

EVO X, GRB STi, GRB STi, Legacy, GRB STi, EVO 9, GRB STi, GRB STi.

It’s a good thing he pulled off before anything real bad could happen. He ended up having to throw Ferdie’s spare Enkeis in the rear and moving his CE28 rear to the front. It’s a damn good thing we’re starting to bring real spares instead of those donuts they throw in your trunk. Vince ended up having to go all the way home to pick up his Toyo R1Rs he bought from Dusty at NNI Racing and mounting them the same day. He didn’t make it back until 6PM later that day.

Legacy, GRB STi, EVO 9, GRB STi, GRB STi.

Legacy, GRB STi, EVO 9, GRB STi, GRB STi.

Meanwhile, my brakes were acting kind of funny. I felt like they were faded or the rotors were warped, getting a lot of modulation under semi-hard braking. I wasn’t sure what it was at the time, but don’t worry, I later found out, the hard way. Ouch. My coilovers were also making weird noises, I guess from the heat expanding the metal. Fortunately nothing bad happened there. Still severe cooling issues, which we later concluded was a result of bubbles in the system. Too bad we didn’t get them out until last night (Monday)!

Amy, Andrew and Yim at basecamp.

Amy, Andrew and Yim at basecamp.

Andrew was absolutely dominating me in his stock EVO 9. I’m absolutely confident that he could’ve took first place in Redine Time Attack for Big Willow if he had a fresh set of tires, some KW coilovers, and TBE. Hell, even with just tires, he might be able to do it. I was so impressed with his driving ability. Watching Andrew and Randy drive is seriously encouraging me to get into autox in the very near future, once I get some scheduling sorted out.

Well, all in all, it wasn’t too bad of a track day, although half the team walked away with mechanical issues. I’ll talk about what went wrong in all of our cars next time. That’s racing for you; the best of the times and the worst of times.

Willow Springs With ST USA, Part I

Monday, August 10th, 2009
Parking my car at YimiSport for the night.

Parking my car in YimiSport for the night.

Track days are always such a pain, sometimes it’s a wonder why we keep on going. On Wednesday, Jon came over to help me bleed my brakes, only to discover that I had a couple lugs fused with the wheel studs (4 to be exact). I call Ferdie up in a hurry and he happens to still be at the shop, so he brings me 7 wheel studs (just in case). I hobble over to YimiSport after dinner and leave my car for my tune; fast forward to Friday night, slightly before 11PM, and I’m putting down around mid 350whp and 390wtq. Same as before the Cosworth engine, but less timing; great!

Hella flush! Just kidding.

Hella flush! Just kidding.

Little did I know that would be the least of my worries this weekend, freakin’ car! Racing can eat at you sometimes, but it can also make you forget about all your troubles too. Well, it was getting late, almost 1AM, so Ferdie, Amy and I head over to Yim’s house for a nap. We’re supposed to get up at 5AM to get back to the shop, pick up a few things and then head on over to the track. I passed the hell out, I was tired and we weren’t even at the hard part yet.

When I checked, it was putting down around 400whp.

When I checked, it was putting down around 400whp.

Meanwhile, Ferdie’s car was still on the dyno. Paul Leung was tuning the damn thing until who knows what time. But all I know is, when we woke up, the car was magically ready. That’s why if you want it done right, you take it to YimiSport! That thing is a beast now, with an output of over 400whp. Stay tuned for more!

Westend Alignment in Gardena, CA

Friday, August 7th, 2009
Westend Alignment is the best, the end.

Westend Alignment is the best, the end.

After you’ve sunk thousands of dollars into your adjustable coilover suspension (at least 2-way), you’ll need to get an alignment to uncap the potential that now lies within your car. If you’ve got a car that requires additional parts for camber adjustment in the rear, I would recommend you get those parts too and get it all setup at the same time. For us Subaru GR STi owners, Cusco makes lateral links to adjust camber in the rear up to -3 degrees. Darin would prefer to work with lateral links as opposed to the Whiteline Rear Camber Bushing Kit.

Don’t cheap out and use band aid solutions; get the real thing, if you’re serious about performance. Once you know you’re ready, give Darin a call and schedule your appointment two weeks in advance. Two weeks you ask? If you absolutely have to get aligned before hand, I’d take it somewhere else; but if you can wait two weeks, your car will handle like Hades’ chariot of death when all is said and done. Do yourself a favor, wait the two weeks, and thank all parties involved. That’s just how good he is!

When you make an appointment, you better be prepared to bet your life on that appointment and make sure you get there early. Darin aligns every single car himself because he’s a perfectionist and can’t stand the thought of even one car making it out of his shop not perfect. His shop is actually a good size and he could easily hire another guy to go through twice the cars and make more money, but again, if one car isn’t perfect, he can’t bear the thought. That’s the kind of guy you want working on your suspension!

I’ve tried Robispec as well as Firestone alignments; Robispec was above average, however I still think Darin’s alignment is superior. Oh that reminds me, make sure you get corner balanced too; it makes a difference. Now I bet you’re wondering, so how does my car handle now? Handling is so sick, it’s confidence inspiring. When I get on the throttle the rear just keeps on rotating and my understeer problems are a distant memory. Turn-in is significantly improved, and I’m still yet to turn on the track settings.

Darin knows I go to the track often and what he decided to have me do is when I get to the track, max out my camber plates to -4, which will also give me a little toe out in the front. He said it’d be my little secret to shave that extra 3/4 of a second to beat my friends. When the track day is over I can go back to my normal setting and preserve the tires, bringing the toe back to 0. How cool is that? No one does it better.

Westend Alignment
18008 S Vermont Ave
Gardena, CA 90248
(310) 808-9233

Bing + Yahoo = Google?

Thursday, August 6th, 2009
Google is still king.

Google is still king.

A month or two ago, I saw a commercial on TV for Microsoft’s Bing, formerly known as Live, formerly known as MSN. They really need to stop changing the name; nobody really cares what it’s called. In any case, it was pretty interesting to see a search engine at PageRank 3 (it’s at 9 now, but amusing nonetheless). I was thinking to myself that Microsoft should just quit because nobody really wants to use their search engine except for the cashback deals.

Well, they too must’ve realized they suck because they recently engaged in a 10-year deal with Yahoo in hopes of tackling the almighty Google as one. Good freakin’ luck guys! I’ve heard estimates as high as 70% in terms of what percentage of the search market Google controls. At the same time I can understand their position; Google is making the big bucks because of all that revenue from AdWords. It’s in Microsoft and Yahoo’s interests to try everything they can to jump in that ring, no matter the cost.

It’ll always be about the advertisers and what kind of services they can offer them; we’ll see if Microsoft and Yahoo together can figure out how to increase relevance in the search results. At least Yahoo had Overture at one point, now known as Yahoo! Search Marketing. They’ve definitely got more seat time in the PPC than Microsoft, although I’m still skeptical to see what kind of changes their combining forces can achieve. To be honest though, I would actually be happy to see them take on the goliath that is Google.

More pay per click options would be great for guys like me. I wonder if Microsoft and Yahoo became competitive in PPC, whether the average cost per click across the board would decrease ever so slightly. I mean if you’re able to get the same conversions from Bing or Yahoo with their PPC program and the cost per click was less, why spend more at Google right? I mean sure you’d still have campaigns running at Google, that’s for sure. But would you spend as much or perhaps spend less and drop more dollars into Bing or Yahoo?

It’ll be interesting to see how this all unfolds in the next year.

ss_blog_claim=d3a2d2daf3fa59cbde1cf4dc514eb8fd